10mm Platinum Plus Support Zip Wire with Brackets

'Complete zip wire supply and installation service - Available'
By using Top Quality equipment and combined with our passion and the knowledge we have of zip wires, you will not be disappointed with your purchase from The Zip Wire Company and you will have a reliable zip wire that will last for many years to come..

Please make sure that if you are comparing zip wire kits, you are comparing "like for like" as "You get what you pay for"

Our zip wires have been brought together using only top quality equipment sourced from the UK, USA and Europe and offers great value for money when compared to some products on the market being offered by our competitors.

WE ARE HERE TO HELP YOU
The Zip Wire Company understands that you might never of come across something like a zip wire before and that you might have many questions that you would like answered before you purchase one of our zip wire kits. Therefore we have put together a FAQ on zip wires which we hope will answer most of the questions you might have, but if after reading the FAQ you still have any questions, then please do not hesitate to call us.

You can read OUR ZIP WIRES FAQ's HERE

If you have any questions, please call us FREE on: 0800 246 5802

Here's what's in the box:

• An Enclosed 10mm Zip Wire Trolley - simply the best enclosed trolley on the market
• 10mm (7x19) Galvanised Zip Wire Cable
• 10mm Round Zip Wire Cable Tensioner
• A 10mm Round Zip Wire Support Bracket
• 3.0m Zip Wire Spring Brake
• A Rubber Pendulum Seat with Cover
• Generic Fitting Instructions

How much wire do I need?:

When measuring for the length of wire that you require, please follow these simple instructions to help you:

1) Start by measuring the distance from the support crossbar at the starting end to the support crossbar at the receiving end
2) Now add on 3m (39m + 3m = 42m)
3) Round up to the nearest 5m to find the amount you need to order (42m rounded up to 45m) - giving amount of wire to order
4) You can always cut this wire using an angle grinder (put electrical tape around wire before cutting)

It is always best to over order on wire (allowing for slackness in the wire) than under order.

Delivery Information:

Please take a minute or two to read and understand about our Deliveries and Damaged Goods on Deliveries


DISCLAIMER:
Please appreciate that while we at The Zip Wire Company are more than happy to help with advice and answer your questions, any advice or guidance given by The Zip Wire Company is for guidance only.

Zip wires (also known as Aerial Runways, Flying Foxes or Tyrolean crossings) can be dangerous if installed incorrectly or on the wrong sort of site and it is therefore strongly advised that the customer, who is buying this equipment, should carry out their own Risk Assessment of the area/site to be used and must be happy that they are satisfied with this Risk Assessment.

It is highly recommended that you carry out a safety inspection on completion of the installation of the zip wire equipment and that the equipment should be continually inspected on a regular basis.

Due to the various construction & Installation methods used by our customers and which are outside of our control, The Zip Wire Company cannot be held responsible for any problems or injuries that may occur during the installation and subsequent use of any zip wires or zi pwire equipment supplied by us if incorrectly fitted.


REMEMBER - WE ARE HERE TO HELP YOU
If you have any questions, please call us FREE on: 0800 246 5802



Go back to the top of page