Our zip wires have been brought together using only top quality equipment sourced from the UK, USA and Europe. They offer great value for money when compared to some products on the market being offered by our competitors.
Please make sure that if you are comparing zip wire kits, you are comparing "like for like" as "You get what you pay for."
By using the very best top quality equipment, combined with our knowledge of zip wires, you will not be disappointed with your purchase from The Zip Wire Company. REMEMBER - WE ARE HERE TO HELP YOU If you have any questions, please call us FREE on: 0800 246 5802
The Zip Wire Company understands that you might never of come across something like a zip wire before and that you might have many questions that you would like answered before you purchase one of our zip wire kits. Therefore we have put together a FAQ on zip wires which we hope will answer most of the questions you might have, but if after reading the FAQ you still have any questions, then please do not hesitate to give us a call FREE on 0800 246 5802 where we will be more than happy to answer them.
You can read OUR ZIP WIRE FAQ's HERE
Here's what's in the box:
How do I work out what Strop size to order:
Please follow these simple instructions to help you:
The size of strop and the way you work out what size you need to order, depends of the circumference size of the receiving end tree.
Once you have this measurement then follow the simple instructions below.
For tree circumferences that measure more than 1.0m in circumference:
You only need to go around the tree once (your measurement) and then add on 40cm to give you your strop size.
(For example: 2.8m + 40cm = 3.2m strop size to order)
For tree circumferences that measure less than 1.0m in circumference:
You will need to go around the tree twice (your measurement) and add on 40cm to give you your strop size.
(For example: 0.90m x 2 = 1.8m + 40cm = 2.2m strop size to order)
How much wire do I need to order:
When measuring for the length of wire that you require, please follow these simple instructions to help you:Remember - It's always best to over order on wire (allowing for slackness in the wire) than under order.
1) Start by measuring the distance from the tree at the receiving end to the sending end tree
2) Now measure the circumference of the sending end tree to be used
3) Add together both these measurements and then add on at least another 3m if less than 50m in length (39m + 3m = 42m) or 5m if more than 50m in length (62m + 5m = 67m)
4) Round up to the nearest 5m to find the amount you need to order (42m rounded up to 45m) or (67m rounded up to 70m). This is the amount of wire that you will need to order.
5) You can always cut this wire using good bolt cutters or an angle grinder (put electrical tape around wire before cutting)
Please take a minute or two to read and understand about our Deliveries and Damaged Goods on DeliveriesDISCLAIMER:
Please appreciate that while we at The Zip Wire Company are more than happy to help with advice and answer your questions, any advice or guidance given by The Zip Wire Company is for guidance only.
Zip wires (also known as Aerial Runways, Flying Foxes or Tyrolean crossings) can be dangerous if installed incorrectly or on the wrong sort of site and it is therefore strongly advised that the customer, who is buying this equipment, should carry out their own Risk Assessment of the area/site to be used and must be happy that they are satisfied with this Risk Assessment.
It is highly recommended that you carry out a safety inspection on completion of the installation of the zip wire equipment and that the equipment should be continually inspected on a regular basis.
Due to the various construction & Installation methods used by our customers and which are outside of our control, The Zip Wire Company cannot be held responsible for any problems or injuries that may occur during the installation and subsequent use of any zip wires or zip wire equipment supplied by us if incorrectly fitted.