12mm Micro Support Zip Wire with Brackets

Please make sure that if you are comparing zip wire kits, that you are comparing "like for like" as "You get what you pay for." - as not all zip wires are created equally. By using the very best top-quality equipment, combined with our knowledge of zip wires, you will not be disappointed with your purchase from The Zip Wire Company and will get many enjoyable years use out of your equipment.

'Complete zip wire supply and installation service - Available'
If you are unsure as to whether or not you feel capable of installing your zip wire, then there's no need to panic because through an approved working partner, we are able to offer you a 'full one stop shop' installation service.

Alternatively, we have made this range of kits easy to install and by following the simple generic fitting instructions which come supplied with the kit, and providing you have already installed your Support frames, then this zip line can be installed by two or three people and be ready for use in around 120 mins or less.

FAQ's:

The Zip Wire Company understands that you might never of come across something like a zip wire before and that you might have many questions that you would like answered before you purchase one of our zip wire kits. Therefore we have put together a FAQ's on zip wires which we hope will answer most of the questions you might have, but if after reading the FAQ's you still have any questions, then please do not hesitate to give us a call FREE on 0800 246 5802 where we will be more than happy to answer them.

You can read OUR ZIP WIRE FAQ's HERE

Here's what's in the box:

• A Lightspeed Micro Zip Wire Trolley - designed for impact braking
• 12mm 7x19 Galvanised Zip Wire Cable
• 12mm Round Zip Wire Cable Tensioner
• A 12mm Round Zip Wire Support Bracket
• 12mm Zip Wire Spring Brake
• Petzl Aspir Seat Harness or a Rubber Seat
• A 160cm Adjustable Lanyard with Karabiners
• Generic Fitting Instructions

How much wire do I need?:

When measuring for the length of wire that you require, please follow these simple instructions to help you:

1) Start by measuring the distance from the support crossbar at the starting end to the support crossbar at the receiving end
2) Now add on 3m (39m + 3m = 42m)
3) Round up to the nearest 5m to find the amount you need to order (42m rounded up to 45m) - giving amount of wire to order
4) You can always cut this wire using an angle grinder (put electrical tape around wire before cutting)

It is always best to over order on wire (allowing for slackness in the wire) than under order.

Delivery Information:

Please take a minute or two to read and understand about our Deliveries and Damaged Goods on Deliveries

DISCLAIMER:
Please appreciate that while we at The Zip Wire Company are more than happy to help with advice and answer your questions, any advice or guidance given by The Zip Wire Company is for guidance only.

Zip wires (also known as Aerial Runways, Flying Foxes or Tyrolean crossings) can be dangerous if installed incorrectly or on the wrong sort of site and it is therefore strongly advised that the customer, who is buying this equipment, should carry out their own Risk Assessment of the area/site to be used and must be happy that they are satisfied with this Risk Assessment.

It is highly recommended that you carry out a safety inspection on completion of the installation of the zip wire equipment and that the equipment should be continually inspected on a regular basis.

Due to the various construction & Installation methods used by our customers and which are outside of our control, The Zip Wire Company cannot be held responsible for any problems or injuries that may occur during the installation and subsequent use of any zip wires or zip wire equipment supplied by us if incorrectly fitted.