The range of tree to tree zip wire kits in this section, come in many sizes of both wire diameter and length. Take a look to find the right one for you.

You will find kits in 10mm and 12mm diameter wire sizes and lengths from 15m up to over 200m+

If you need any help or advice, please call us on 0800 246 5802 (office hours)

The range of tree to support zip wire kits in this section, come in many sizes of both wire diameter and length. Take a look to find the right one for you.

You will find kits in 10mm and 12mm diameter wire sizes and lengths from 20m up to over 100m.

If you need any help or advice, please call us on 0800 246 5802 (office hours)

The range of support to support zip wire kits in this section, come in many sizes of both wire diameter and length. Take a look to find the right one for you.

You will find kits in 10mm and 12mm diameter wire sizes and lengths from 20m up to over 100m.

If you need any help or advice, please call us on 0800 246 5802 (office hours)

The range of support to support zip wire kits with brackets in this section, come in many sizes of both wire diameter and length. Take a look to find the right one for you.

You will find kits in 10mm and 12mm diameter wire sizes and lengths from 20m up to over 100m.

If you need any help or advice, please call us on 0800 246 5802 (office hours)

Here's the first in our range of zip wire kits aimed at children up to the age of 10.

Easy to set up and install, this range of kits you can have these kits up and running in no time at all.

Get your children outdoors and enjoying the healthy life with one of these kits, providing hours of fun.

If you are looking for a quality family zip wire that can give the whole family many hours of fun and excitement, then you have found them. These brilliant 10mm zip wire kits are available in various lengths and can easily be fitted between two trees or two support A-frames.

By following the simple generic fitting instructions, these zip wire kits can be installed either between two trees, a tree and a support or two supports by two or three people and be ready for use in about 120mins* or less (*provided you have built your supports if needed)

These brilliant 12mm zipwire kits are available in various lengths and can easily be fitted between two trees or two support A-frames. If you are looking for a quality family zipwire that can give the whole family many hours of fun and excitement, then you have found them.

By following the simple generic fitting instructions, these zipwire kits can be installed either between two trees, a tree and a support or two supports by two people and be ready for use in about 90mins* or less (*provided you have built your supports if needed)

Please call us on: 0800 246 5802 (office hours) for further information

We are pleased to offer you a comprehensive range of excellent value and top quality trolleys for use with your zip wire.

From the slower Petzl Speed Trolley to the faster and safer Lightspeed EZ Clip Trolley there's something to suit everyone.

If you need any help or advice, please call us on 0800 246 5802 (office hours)

One of the most important parts of any zip wire is the wire.

There are many wires out in the marketplace that have been suggested for use with zip wires. After many years of field testing, and the selling of hundreds of zip wire kits, we have two recommendations as to which wire to use.

To be able to get the best out of your zip wire, it is strongly recommended that you use a Galvanised wire. The wire we sell comes in 10mm and 12mm diameter and is available in two different specifications.

The choice is either a 7x19 construction, which offers a moderate speed to the rider or, a 19x7 construction which offers not only a smoother ride, but also a faster ride.


Available in 10mm, 12mm dia and lengths from 20m up to 300m +

After a great ride down any zip wire the one thing that every zip wire ride needs is a brake to help you stop.

Again, we have a selection of Spring Brakes to fit all our 10mm and 12mm lines.

Simply to install and a must have bit of equipment. Make sure you have yours.

Another important part of any zip wire is the connection between your trolley and either your seat or harness. Normally this would be by either a chain or a lanyard which is now the more popular option.

We have put together a great range of lanyards at great value prices which come in all lengths and combinations.

If you need any help or advice, please call us on 0800 246 5802 (office hours)

Every zip wire needs to have either a seat or a seat harness as part of the kit.

Depending on which kit you go for, here is the simple choice of having a rubber seat that connects via lanyard to your trolley, a rubber seat with a galvanised chain to connect to your trolley or if you have the Junior Zip Wire then we have the Rope and Plastic Button seat for you.

All will make the perfect finishing touch to your zip wire kit.

If you don't fancy a seat to sit on or you simply would like that extra bit of safety built into your zip wire, then attaching either a seat harness or a full body harness via a lanyard to your trolley is the way to go.

This range of top quality and excellent value for money harnesses include something for everyone from seat harnesses to a full body harness for both children and adults.

If you need any help or advice, please call us on 0800 246 5802 (office hours)

Looking to protect your trees from the wire cutting into them, then add some of this Plastic Tree Saver Tubing to your order and help to protect your trees.

This plastic tree saver tubing is sold by the metre. Simply slide the 3.5mm thick plastic tubing over the wire before putting around the sending end tree and you are ready to go.

Every kit that has a strop in it, will have the plastic tubing already in place over the wire between the two soft eyes.

Made to help to protect your trees from the wire.

Well now there's no stopping everyone enjoying one the most exhilarating fun experiences ever. Recently we were asked by an Isle of Skye resident if we sold a zip wire that their severely disabled son could use.

So we design and came up with a solution that offered a zip wire kit for both the son and the rest of the family to use that was fully interchangeable.

Using a swing seat that they already had along with one of our zip wire kits and a special conversion kit, they were able to construct a zip wire for their son to enjoy the same thrills as his dad.

This was a very special moment that brought a lot of happiness and joy to a lovely 19 year old boy.

One thing that every zip wire needs is for the zip wire cable to have some tension put into it.

Here we have a tensioner for all size wires that are used in our range: 10mm and 12mm.

Depending on which size wire is being used, and in which tyoe of setting, they come in the form of either a Galvanised Turnbuckle or a Cable Drum Tensioner

You have a good zip wire and now you need a good braking system. Look no further as we are happy to bring you the zipSTOP Braking System. Simply the best zip wire braking system on the market.

Installing one of these zipSTOP systems will be a great investment as the difference it makes to your stopping at the end of your zip wire run is immense.

This brilliant bit of kit uses a self-regulating eddy current magnetic braking system to brake zip wire riders giving you a smooth and consistently comfortable stop.

We are happy and pleased to introduce to our customers, these super strong, recycled rubber and excellent value Rubber Safety Matting. Competitors are selling this at up to twice the price.

These huge 1.5m x 1.0m x 23mm rubber safety mats offer great protection to both the grass and to any falling children in children's outdoor play areas.

At 23mm deep, these mats make a superb addition to any domestic or commercial zip wire.

They give great protection against falling and can absorb impact from a critical fall height of 3.3m.

These 23mm mats have been tested and certified by RAPRA for use up to a critical fall height of 3.3m under the safety regulations EN1176/77.

They are perfect for many outdoor areas that are subjected to underfoot wear and tear while also being Wheelchair Friendly too.

Due to the flexibility of the mats, they can be fitted on both level or uneven ground without any problems.

Add some extra fun you your zip wire ride by adding one of these great value for money Hand Grip.

You too can literally fly like a bird with one of these Hand Grips fitted to your zip wire Trolleys.

Simple to attach to the zip wire trolley, this will add hours of fun hanging around.....

Ok so not everyone wants to install a zip wire by drilling through trees. So to help out we have some turnbuckles which you can use with some wire grips and one or two of these Zip Wire strops.

These Strops are available in various size wire and various lengths.

Complete with soft eyes at each end, these strops allow for inaccurate measuring and for those who do not want to drll through any trees.

This selection of Support frame crossbar brackets are for use when installing a simple A-frame.

They are attached to the back end of a Support frame crossbar at the receiving end by simply drilling a hole in the centre of the crossbar, and two smaller holes to take your fixings (either studding rod or coach bolts, both with Nyloc nuts)

Once you have drilled your holes, feed the rolled and fused end of the wire through the bigger centre hole from the back of the support bar.

When you have pulled all the wire through the hole, you can then connect the thimble eye in the wire with the bolt.

Please note:
Studding Rods or Fixing bolts are NOT included and are something you will need to buy from a good Hardware store.

Bolts to be inspected and retighten (if needed) at every inspection

Most people will know what for why you sometimes need a Karabiner with a zip wire.

One of the most used parts in a zip wire if you are using a lanyard to connect to a seat and trolley is a karabiner.

Many have built in safety features like screw lock and spring loaded gates making our range of zip wire karabiners one of the most comprehensive available.

In this section you will find hardware that is associated and use with zip wires.

Here you will find Stainless Steel Swivels to Galvanised Thimble Eyes to Galvanised Zip Wire Grips.

Take a minute and have a look at these wonderful zip wire videos from around the world.

We have put together a selection of zip wire videos for you to look at and get a feel of exhilaration for some of the great rides from around the world.

Sit back....make sure your speakers are turned on......and enjoy.