Please make sure that if you are comparing zip wire kits, that you are comparing "like for like" as "You get what you pay for." - as not all zip wires are created equally. By using the very best top-quality equipment, combined with our knowledge of zip wires, you will not be disappointed with your purchase from The Zip Wire Company and will get many enjoyable years use out of your equipment.

Please find below a list of items that you will find in the box. It's worth noting that you will receive two deliveries for your zip wire kit. 1x will be the wire and strop which is made and cut to order from our wire manufacturer in the West Midlands and 1x will be all the hardware for the kit which comes directly from The Zip Wire Company.

• A Boomerang Zip Wire Retriever Trolley
• 12mm (7x19) Galvanised Zip Wire Cable
• 12mm Zip Wire Turnbuckle Tensioner
• Turnbuckle Backup Safety Wire
• 3.0m x 12mm Zip Wire Spring Brake
• Petzl Aspir Seat Harness or A Rubber Seat
• A 160cm Lanyard with Karabiners
• A choice of 12mm Cable Strop Length
• A packet of 4 - 12mm Galvanised Wire Grips
• Generic Fitting Instructions

At all times when using a zip wire, safety should be paramount and at the forefront of your thoughts. To that end we offer a unique product that all zip wires (those that are using a turnbuckle) should really be using - a Turnbuckle Backup Safety Wire.

The idea of this extra piece of wire is to act as an extra piece of safety in your zip wire equipment. The Turnbuckle Backup Safety Wire is a 2.5m piece of 10mm galvanised wire that has had both ends rolled and fused which stops the wire from splaying and keeps the wire permanently as one piece.

You need to eliminate the risk of the turnbuckle failing. By this we mean the ends of the turnbuckle popping out when under tension. It's a very small risk, but one worth eliminating for such a small price and giving you piece of mind.

Simply feed the wire through the thimble eyes of the strop that connect to the turnbuckle at one end and the thimble eye on the end of the wire that connects to the other end of the turnbuckle.Then overlap the wire.

Using the enclosed 4x wire grips, place them spaced out evenly along the overlap (as per the diagram) and then after removing as much slack as possible, tighten them in place.

'A small price to pay for piece of mind and the safety of all users.'

Alternatively, we have made this range of kits easy to install and by following the simple generic fitting instructions which come supplied with the kit, this zip line can be installed by two or three people and be ready for use in around 120 mins or less.

If you are thinking of intstalling your new zip wire kit yourself, then one thing that you will need to consider is that doesn't how long the run, you will need to put tension into the (wire) run. Now normally we would be more than happy to offer you our complete installation kit, but unfortunately due to having a run on them in the last few months, we have completley sold out. Although we do have some more on order from our manufacturers, they are unlikely to be here until at least January 2025.

So please, consider how you are going to add this tension to you wire.

'Complete zip wire supply and installation service - Available'
If you are unsure as to whether or not you feel capable or comfortable of installing your zip wire, then there's no need to panic because through an approved working partner, we are able to offer you a 'full one stop shop' installation service.

Our preferred professional company based on the South Coast, will supply and professionally fit zip wires all over the UK Mainland. It is very difficult to provide costings here as there are a lot of bits of information required first to even consider a price.

As a ball-park price please see below:

Simple: 30m Tree to Tree zip wire: from £2,000 +vat

Simple: 30m Tree to Tree with 2.0m High, 1.5m x 1.5m Take off platform: from £3,900 +vat

Mid: 100m Tree to Tree with 2.0m High, 1.5m x 1.5m Take off platform: from £6,740 +vat

Dual Racing Zip Wire: 2x 30m Side by Side zip wires with all the Supports: from £19,000 +vat

These prices are just for a rough indication and other cost factors will apply.

The Zip Wire Company understands that you might never of come across something like a zip wire before and that you might have many questions that you would like answered before you purchase one of our zip wire kits. Therefore we have put together a FAQ's on zip wires which we hope will answer most of the questions you might have, but if after reading the FAQ's you still have any questions, then please do not hesitate to give us a call FREE on 0800 246 5802 where we will be more than happy to answer them.

You can READ OUR ZIP WIRE FAQ's HERE

Please follow these simple instructions to help you:

To work out the size of strop and the way you work out what size you need to order for the receiving end crossbar, follow the simple instructions below:

1) Measure the circumference size of the support crossbar and double the measurement (48cm x 2 = 96cm)
2) Then add on 40cm (96cm + 40cm = 136cm)
3) Round this up to 140cm
3) The size of strop you need to order is 1.40m

When measuring for the length of wire that you require, please follow these simple instructions to help you:

1) Start by measuring the distance from the support crossbar at the starting end to the support crossbar at the receiving end
2) Now add on 3m (39m + 3m = 42m)
3) Round up to the nearest 5m to find the amount you need to order (42m rounded up to 45m) - giving amount of wire to order
4) You can always cut this wire using an angle grinder (put electrical tape around wire before cutting)

Remember - It's always best to over order on wire (allowing for slackness in the wire) than under order.

Please take a minute or two to read and understand about our Deliveries and Damaged Goods on Deliveries